Digital Counter with High Resolution & with Judgement Function

HOME > Product Information > Digital Indicators

Digital Counters ; with High Resolution & with Judgement Function

	C-7HS
	C-7HS has resolution capability of 0.1µm. ( 0.5µm to convertible )

with High Resolution	C-7HS
Resolution	0.0001mm ( 0.1µm ) / 0.0005mm ( 0.5µm ) to convertible

	CM-5B
	Equipped with judgement function OK, ±NG (No Go).
	Either 5µm or 1µm resolution setting can be selected.

with Judgement Function	CM-5B
Resolution	0.005mm / ( 0.001mm to convertible )

Specifications

Model

CM-5B

C-7HS

Resolution

0.005mm or 0.001mm
select by conversion switch

0.0001mm ( 0.1µm ) / 0.0005mm ( 0.5µm ) to convertible
( Please specify either 0.0001 or 0.0005mm
display at the time of purchase.)

Display
capacity

For 0.005mm, up to 5 digits
(+00.000 - +999.995) with ± symbol
For 0.001mm, up to 5 digits
(+0.000 - +99.999) with ± symbol

6 digits display
with ±sign ±99.9995 / ±99.9999

Response speed

1000mm / sec at 0.005mm setting
and 600mm / sec at 0.001mm setting

100mm/sec

Judgement
setting Display

Lower and Upper limit setting
via digital switch of 6 digits each

---

Quantizing error

± 1 count

Judgement
Output

Output from relay contact point
(a contact point)(DS1-S-DC5V
Matsushita or equivalent product)

---

Judgement
Display

-NG (Yellow), OK (Green) & +NG (Red)

---

Operating
temperature

0 - 40ºC

Power supply

AC100V - AC240V 50/60Hz

Weight /
Dimensions

2.2kg / 200(W)×230(D)×70(H)mm

2.1kg / 200(W)×230(D)×60(H)mm

Accessories

Judgement output connector
(PRC03-12A10-4F10.5 Tajimi brand)

Built-in tilt stand (tilts the front of the
counter up at slight angle for easier reading)

Compatible
linear gauges

DL-2(S) / D-5(S) / D-10(S) / D-20(S)
D-50(S) / D-100(S)
D-5UZ / DN-10S / DN-20S

D-10HS;	0.0001mm ( 0.1µm ) / 0.0005mm ( 0.5µm )
D-10SS;	0.0005mm ( 0.5µm )

Data output
(BCD OUT)

Output by positive logic, parallel digits and open collector

Functions

User selectable resolution
(0.001mm at time of shipment).

Equipped with failure alarms
(When counting error or
gauge fails, display blinks)

Judgement output is constantly on
(control output is possible with
an additional optional connector)

Setting values for judgement is
included in ±NG at shipment
(Changeable)

BCD output can be connected to,
for example, a sequencer by using
open collector.

RESET	;For zero reset at any desired position
DIRECTION	;Numerical direction can be changed by DIRECTION switch located on back panel
ALARM OUT	;Output abnormal value when response speed is exceeded
LATCH IN	;Holds the display value and external unit's output data
RESET IN	;For zero reset from external unit via its RESET input

Options

Additional pass/fail detection
   control connector
   (attachable to the back panel).
   Includes CM-5B-CONT.

Extemal RESET/LATCH connector
is added (on back panel). CM-5B-RL.

Tilt stand is added
(for tilting display for easy viewing).
CM-5B-ST.

Printer (PDP-1N) --- Statistic operation

External RESET/LATCH function; C-7HS-RL.

\| HOME \| Product Information \| Digital Indicators \| INDEX: Model No. \|	\| Page Top \|


Design and specifications are subject to change without notice for future improvement.