HOME > Product Information > Thickness Gauges

Parts Drawings ; Dial Thickness Gauges, Dial Lens Gauge

Dial Thickness Gauges  Model  G H GL 01 Crystal 11 * 120Z Main Gear ( with 16Z Pinion ) 21 Spindle 02 Bezel 12 * 12Z Pinion 22 * Guide Knock 03 Pointer 13 * 120Z Idle Gear ( with Hair Spring ) 23 Coil Spring 04 Outer Dial 14 * Upper Metal ( with Jewel ) 24 * Shock-Proof Rubber 05 Hand 15 * Wire Spring for Bezel 25 Anvil base 06 Inner Dial 16 * Set Screw for Upper Metal ( S-010 ) 26 * Frame 07 * Base Metal ( with Jewel ) 17 * Claw 27 * Cap 08 * Set Screw for Base Metal ( S-217 ) 18 * Set Screw for Claw ( S-009 ) 28 Lever ( with Lift Knock device ) 09 * Guide Metal 19 Anvil 29 Set Screw for Lift ( S-064 ) 10 * Set Screw for Guide Metal ( S-012 ) 20 Contact Point set 30 Back 31 Set Screw for Back ( S-128 ) * mark are not for sell. | Page Top | Dial Thickness Gauges  Model  H G GL 01 Crystal 11 * 120Z Main Gear ( with 16Z Pinion ) 21 Spindle 02 Bezel 12 * 12Z Pinion 22 * Guide Knock 03 Pointer 13 * 120Z Idle Gear ( with Hair Spring ) 23 Coil Spring 04 Outer Dial 14 * Upper Metal ( with Jewel ) 24 * Shock-Proof Rubber 05 Hand 15 * Wire Spring for Bezel 25 Anvil base 06 Inner Dial 16 * Set Screw for Upper Metal ( S-010 ) 26 * Frame 07 * Base Metal ( with Jewel ) 17 * Claw 27 * Cap 08 * Set Screw for Base Metal ( S-217 ) 18 * Set Screw for Claw ( S-009 ) 28 Lever ( with Lift Knock device ) 09 * Guide Metal 19 Anvil 29 Set Screw for Lift ( S-064 ) 10 * Set Screw for Guide Metal ( S-012 ) 20 Contact Point set 30 Back 31 Set Screw for Back ( S-128 ) * mark are not for sell. | Page Top | Dial Lens Gauge  Model  GL G H 01 Crystal 11 * 120Z Main Gear ( with 16Z Pinion ) 21 * Guide Knock 02 Bezel 12 * 12Z Pinion 22 Coil Spring 03 Pointer 13 * 120Z Idle Gear ( with Hair Spring ) 23 * Shock-Proof Rubber 04 Outer Dial 14 * Upper Metal ( with Jewel ) 24 Anvil 05 Hand 15 * Wire Spring for Bezel 25 Knob for Anvil 06 Inner Dial 16 * Set Screw for Upper Metal ( S-010 ) 26 * Frame 07 * Base Metal ( with Jewel ) 17 * Claw 27 Lever ( with Lift Knock device ) 08 * Set Screw for Base Metal ( S-217 ) 18 * Set Screw for Claw ( S-009 ) 28 Set Screw for Lift ( S-064 ) 09 * Guide Metal 19 Contact Point ( R-Type ) 29 Back 10 * Set Screw for Guide Metal ( S-012 ) 20 Spindle 30 Set Screw for Back ( S-128 ) 31 Contact Point ( Flat Type ) * mark are not for sell. | HOME | Product Information | Thickness Gauges | INDEX: Model No. | | Page Top | Design and specifications are subject to change without notice for future improvement.

Copyright(C) OZAKI MFG.CO.,LTD. All Rights Reserved.